JIC (Joint Industry Council) fittings are widely used in fuel delivery and fluid power applications, especially where high pressure (up to 10psi) is involved. Method of sealing differs. JIC male has 37° flare which seals against 37° seat in female. JIC male can also seal against 37° flared tubing with JIC nut and sleeve.
What prompted me to think about putting together this article on AN and JIC Thread. We received an order from a person who wanted some adaptors for a component he had imported.
Identification was an enquiry we had earlier this week. JIC fittings size chart for identifying the correct size of bulkhead fitting adapter for skid steer quick couplers. The JIC 37° flare male will mate with a JIC female only. The JIC female has straight threads and a 37° flare seat.
The Seal is made on the 37° flare seat. Some sizes have the same threads as the SAE 45° flare. Carefully measure the seat angle to.
Originally named for the now-defunt Joint Industrial Commission ( JIC ), this connection is very common in fluid power systems.
Both the male and female halves of this connection have 37° seats. The seal takes place by establishing a line of contact between the male flare and the female cone seat. The UNJF profile is a modified UNF profile. UNJ specifies a minimum and maximum root radius for the thread to increase strength.
It also features high holding power with low torque requirements. Female JIC 37° – Swivel – 90° Elbow – Long Drop. The 37° JIC connection consists of three . B inch mm inch mm inch inch mm. Gå til JIC 37° Flare (SAE J514) – Both the JIC male and JIC female have a 37º flare seat and straight threads. The male and female flare seats seal when the straight threads are engaged.
The connection is held mechanically by the straight threads of the male and female halves. Jic fitting jic hydraulic tube fittings discount hose. It is important to note that most SAE . Jic tube fittings straights hose and fittings, etc.
BSP – British Standard Pipe. BSPP – British Standard Pipe Parallel. BSPT – British Standard Pipe Tapered.
DIN – Deutsche Industrial Norme (German). ISO – International Standards Organization. JIC – Joint Industrial Council. JIS – Japanese Industrial Standard.
NPSM – National Pipe Straight Mechanical. All RYCO parts have a unique part number stamped on to aid identification. Depending on whether the male or female thread or both are available, different features will aid identification. Are threads parallel or tapered? Solved: Does any one have any ideas on how to model a JIC Thread with inventor.
I can model the physical geometry but not sure on how I should do the.